Removing old concrete from mixer?

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Post Reply
Ouch
Posts: 51
Joined: Sat Mar 29, 2014 9:56 pm
Location: Newport -Wales

Post: # 101097Post Ouch

Back in months ago I asked about acquiring a cement mixer for a slow moving project. As a measure of how slow things are going, I've just bought one, second hand. It came with about 30kg concrete stuck to the inside of the drum as a freebie :(

So, any thoughts on how I can get it out without massive personal effort and grief? It seems to be fairly evenly distributed around the larger circumference of the drum.

Cheers!

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 101099Post seanandruby

A small breaker and hard work. wear ear plugs and goggles.
sean

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 101102Post dig dug dan

Smash as much out as you can , then get some brick acid and pour a load in, let the drum spin for a good 10 minutes. Rinse out and repeat a couple more times.
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 101110Post GB_Groundworks

You can also get the worst out with breaker take the drum off and light a fire in it cracks the concrete off but you'll loose the paint of it, careful what you do with the wash out of the acid shouldn't be going down the drain.

Also heard of good angular grit and acid and few hours of spinning

I use a wrecking bar and a chipping hammer ball ache but gets it done
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

lutonlagerlout
Site Admin
Posts: 15182
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 101112Post lutonlagerlout

buy a new drum?
drum
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Ouch
Posts: 51
Joined: Sat Mar 29, 2014 9:56 pm
Location: Newport -Wales

Post: # 101183Post Ouch

Spent a good few hours over the weekend chipping away at stratified cement with a claw hammer, pry bar and an old screwdriver. Managed to extract a full rubble sack worth. The headache is just starting to go.

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 101817Post henpecked

Just inherited a freebie with about 50kg nicely layered around the sides. Looked like it had never been washed as breaking it out ,looked like excavating a gobstopper. Its a big newish machine, so I thought it worth a go.
Spent two days with a peck and brick acid, then a hammer and bolster, no good. Used 5ltr of acid, it just seemed to melt off the exposed lime, then you just get a layer of exposed aggregate. Impervious to acid.
My breaker was on loan, so I got my heavy duty SDS drill with hammer function. Stuck an only 12mm bit on the end and got through more in 2 hours than I had in two days, and not so bad on the ears either.
Now have a nice empty drum. I though it was made of plastic once the concrete was out, I was throwing it around like a toy once it was 2/3rds lighter! :cool:

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 101821Post dig dug dan

what lll said!



Edited By dig dug dan on 1417539107
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 101824Post Dave_L

Air chisel and a decent set of ear defenders, job done
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 101831Post henpecked

dig dug dan wrote:what lll said!
Okay if you can get the right drum/volume/year......

Post Reply