Page 1 of 1

Posted: Wed Apr 25, 2018 8:54 am
by matt_north
Hi All

This question is nearly asked about 10 down on this forum but i could just do with a definite if someone wouldn't mind.

After laying 50sqm of indian stone and swearing to myself i'll let someone else do the cobble setts area. After a few weeks the temptation is too much. I was just checking on the bedding mix (http://www.pavingexpert.com/setts03.htm) but Tony mentions a C7.5P mix but also mentions using a moist mix. I'm not sure which it should be. The 30sqm of cobble setts i have to lay are all for a pathway with just foot traffic except about 3 sqm where one tyre may run over it when parked.

Just one final question. I used Rompox Easy on the patio, based on the usage above would anyone recommend Rompox Easy again or the more heavyweight 2 part resin they do?

Thanks for any help Matt

Posted: Fri May 11, 2018 10:02 am
by matt_north
Hi All

Just to answer my own question. 6:1.