Page 1 of 1
Posted: Sat May 19, 2012 6:17 pm
by ambient
using breaker on my hitachi zx 30 yesterday all of a sudden breaker wouldnt shut off when i took my foot off lifted armrest up still wont stop anybody had this problem
Posted: Sat May 19, 2012 7:16 pm
by Dave_L
You'd probably do better to post this type of question on www.ceforum.co.uk amb 
some right knowledgeable guys there.
Posted: Sat May 19, 2012 7:44 pm
by ambient
joined yesterday but it wont let me post on it
Posted: Sat May 19, 2012 8:18 pm
by DNgroundworks
the guys over there are really helpful and some scary knowledgeable, they will answer your problem in no time, dont know why you cant post though?
Weve got that drainage job at higher trap, going up there with the 8 tonne and track dumper in a few weeks. Cheers for that Tony.
Posted: Sat May 19, 2012 8:24 pm
by local patios and driveway
Will point them here
Posted: Sat May 19, 2012 8:50 pm
by GB_Groundworks
never had problem, but have you got the tap set in into breaker mode or is it in two way mode like for auger or your thumb...
breaker need to be in 1 way due to the high pressure build up on the return stroke
when was the breaker last gassed? not to do with it but without regular use they can loose the gas, we try and run our ones every month just to keep them oiled up all the way round.
sounds more like a solenoid problem or a problem at the block with the foot switch.
Edited By GB_Groundworks on 1337495193
Posted: Sat May 19, 2012 10:30 pm
by local patios and driveway
Posted: Sun May 20, 2012 7:12 am
by Dave_L
They manually approve join requests over there, sometimes takes days to be approved, well mine did 
Posted: Sun May 20, 2012 7:56 am
by ambient
thanks lpad
Posted: Sun May 20, 2012 8:31 am
by lutonlagerlout
liked this reply
"Must be one of those chinky budget models, switch the engine off and all will be ok. ....... "
LOL
LLL
Posted: Sun May 20, 2012 10:04 am
by DNgroundworks
Some really good craic on there
Posted: Wed May 23, 2012 7:51 am
by ambient
stripped it down wasnt pedal but valve jammed open in main valve block had to use some fine emery paper to polish it up put back together works fine
tap was set wrong and breaker pressure was the cause cheers all
Posted: Wed May 23, 2012 8:31 pm
by GB_Groundworks
BOOM...
can you stickit up the arse of the ce forum member who dismissed the tap haha brew cabin rocks on
joking aside, its a common one most ppl dont read the manual hehe
been using our jcb 801.6 today with our krupp breaker and noticed it continued working when arm rest was lifted been a hot day to be breaking out concrete all day knew i should have brought the 3cx and just gone heavy handed haha
Posted: Sat Jun 09, 2012 6:50 pm
by ambient
decided to replace zx 30 thinking of having a change and going for a takeuchi tb 228 or might get zx 27-3 undecided had hitachis for 15 years last one not as good as rest