Page 1 of 1
Posted: Sat Apr 21, 2012 1:41 pm
by haggistini
First question on an 18 month contract to totally refurb our beloved town hall You don't get buildings made like this anymore. So I'm proud to be a part of bringing it back to life!
I need the biggest machine possible to fit in a doorway 1200mmx2600mm ???
Need to construct water harvest system here no sure of dimensions yet but need to get it out ASAP
Posted: Sat Apr 21, 2012 2:47 pm
by lutonlagerlout
crikey that looks like my local haggi :;):
LLL
Posted: Sat Apr 21, 2012 2:50 pm
by digerjones
think haggi you are looking at something like a 2 ton machine. think mine with expanding tracks is 1.6 ton about 100mm wide. the hight might be a problem but get one with out a cab. a 1.5 tonner would do it no problem.
Posted: Sat Apr 21, 2012 2:52 pm
by haggistini
That's the courtyard it was converted in to a night club about 10 years ago called the zone. Many a mad one in there!! the building has stunning brick work and lots of terracotta masonry, pics to follow this is a big project and I have just recived the paper work some very nice paving for you all too pennant stone from the Forrest of dean!
Posted: Sat Apr 21, 2012 6:43 pm
by Pablo
A 1.6 ton Takeuchi with the open cab and expanding tracks would go through that easily and you can pop the cab off in 5mins.
Posted: Sat Apr 21, 2012 8:06 pm
by haggistini
That's what's I was thinking Paul, nice machines to drive too.
Posted: Sat Apr 21, 2012 8:24 pm
by haggistini
Tb016 will do it with or without can 980mmX2350mm