Page 1 of 1
Posted: Sat Mar 17, 2012 6:14 am
by haggistini
Need 1 of these in good or new condition anyone?
http://www.probst-handling.co.uk/pdf/specsheets/al33.pdf
Must be the "S" model..
Posted: Sat Mar 17, 2012 8:50 am
by mickg
yeah I have one, only difference is mine has 2 wheels on each side which i think is the AL43s
give me a ring if your interested
Posted: Sat Mar 17, 2012 1:34 pm
by DBriggs
I have a Belle MaxiPave I could part with if you're interested? It does need a new wheel but besides that it always did the job.
Posted: Sat Mar 17, 2012 5:13 pm
by cookiewales
DBriggs wrote:I have a Belle MaxiPave I could part with if you're interested? It does need a new wheel but besides that it always did the job.
probst are the best ie german 
Posted: Mon Mar 19, 2012 9:07 am
by DBriggs
yes they are the best....
...(why do you think I want to get rid of the Belle? - haha)
Posted: Wed Apr 04, 2012 7:47 pm
by haggistini
Hired one today before I tried to chip Mickg on the price and I was very unimpressed with it ! Still saws buzzing all day........ And blockleys clays are like bananas and only good for crushing IMHO I can't show you this job I feel like jacking after the shower of shit levels I had to work to today ie: above damp!!!!!!
Posted: Wed Apr 04, 2012 9:41 pm
by mickg
I never had any issues on the clay paving I cut with it haggi
photo in use
probst block splitter
Posted: Wed Apr 04, 2012 10:38 pm
by lutonlagerlout
now you know why we use a line when laying clays haggis :;):
you do get some bananas and propellers though
what colour you laying?
LLL
Posted: Wed Apr 04, 2012 10:53 pm
by haggistini
i have been using lines and correcting as i go but its a tw*t when you have to keep flipping them about as one side has no spacers and the sizes are 208x103mm i would rather point these like the yanks do,i also have about 6 lads who dont give a feck or care how it looks and a boss who wants M2 than compliments
Posted: Thu Apr 05, 2012 7:45 am
by cookiewales
haggistini wrote:i have been using lines and correcting as i go but its a tw*t when you have to keep flipping them about as one side has no spacers and the sizes are 208x103mm i would rather point these like the yanks do,i also have about 6 lads who dont give a feck or care how it looks and a boss who wants M2 than compliments
wellcome to the real world clay paviours are proper paving ie dont date dont fade and you need to be at the top of your game to lay them right and cut them right have you checked the teeth they revole around should be sharp as mickg says they are good i had one could not fault them in the right hands you need proper paviours not cbp monkeys :p
Posted: Thu Apr 05, 2012 4:04 pm
by lutonlagerlout
once you get into the rythym i dont find them that hard
you just cant bang them down like CBP
LLL 
Posted: Thu Apr 05, 2012 10:45 pm
by mickg
like I told you on the phone haggi my splitter has never had the teeth rotated and has 2 sides as new - still a bargain buy in my opinion
let me know if your still interested seeing you made me drag it out of my garage to photograph it and I found out how much they are to buy a new one its going on ebay shortly
Posted: Fri Apr 06, 2012 10:51 am
by haggistini
I'd rather use a saw to be honest Chaps! get it on the bay mick hope it makes good money and thanks anyway.
