The Brew Cabin

Posted: **Sun Sep 25, 2011 8:35 pm**

Posted: **Sun Sep 25, 2011 9:15 pm**

ive done that with our 3cx into our dump loader trailer was fine till the stabaliser legs wouldnt fit inside the trailer had to make a swift exit, the bigger machine easier it is, load our 7 ton on like that but 3 ton onto 7,5 toner is worse your at like a 45degree angle foot on the widow frame job then its not warmed up enough and wont lift itself hehe

tight arse moment

The Brew Cabin

One for giles.....