Laser level - Any recommendations?

[dig dug dan]

I have a dewalt laser level, with a finder , and it is not as good as it used to be. it spins a lot slower, and when you try and move the beam a fraction, it moves a lot.

Can anyone recommend one?

Ideally i want one with a visible beam. I like to use it for fencing, by working out the height drop over the lenght of the fence, then dropping each post evenly to give a neat finish. To do this, i set the first post, then shine the laser dot on it, and cast this measurement down on the nest post +/- the drop.
I also use it for setting pins in trenches for footings, and for working out excavations.

So, i need a spinning one, one that i can manually rotate, and self levelling if possible?

any ideas, and also, best place to buy one!

[Pablo]

I had both my levels serviced at Service Point recently which included new motors etc they are as good as new now. Cost me £140 each but money well spent.

[lutonlagerlout]

i still use a wild heerbrugg visual level which has served me well for 15 years,i know the digger guy uses a lazer level and it has a little sensor that bleeps on the staff,which means he can use it solo when digging trenches
I'll ask him tomorrow dan
LLL

[dig dug dan]

cheers tony.

[msh paving]

I have a single grade topcon invisible beam, and a specrtra physics manual dual grade, both are great tools would not be with out a laser on drive ways set the %grade turn it towards fall
everything is bang on no over digging, the manual grade is great for digging between 2 point that have a fall between them as you can make it work to fit,
visible beams are more off a interiour laser,
toposell laser service
this is the company i use, laser service £47+vat+parts
very helpfull experianced people in all survey equipment nothing to much trouble MSH

[GB_Groundworks]

[url=http://cgi.ebay.co.uk/spectra-Laser-lev ... ViewItemQQ



ptZUK_Measuring_Tools_Levels?hash=item3efbc84d6f#ht_1426wt_1167]http://cgi.ebay.co.uk/spectra....wt_1167[/url]

any good???
[url=http://cgi.ebay.co.uk/spectra-Laser-lev ... ViewItemQQ

ptZUK_Measuring_Tools_Levels?hash=item3efbc84d6f#ht_1540wt_1119]read me i work better[/url]

editing my posts there was nowt wrong with it in the first place [shakes fist haha]



Edited By GB_Groundworks on 1265401534

[dig dug dan]

thats sounds good. Digger reciever is a good idea too.

Saw one similar at saltex for a digger, and they wanted £5000 for it!!!

[msh paving]

I've got a magnetic digger reciver on a mini digger there arn't that great as the bucket has to be as the same angle every time to get accurate reading ok for rough dig out but not for footings or final grade MSH

[DNgroundworks]

I Have a spectra laser level, and it is great, self leveling, remote controled. It must be the same as MSH'S as it has the dual grade gradient function on it, good bit of kit

[dig dug dan]

thanks for all the comments. Will do some online shopping now!

[dig dug dan]

had the dewalt repaired today. Turns out the drive belt was stretched, and guess what? you cannot replace it without buying the whole unit which is dearer than what i paid for the machine.
To be fair to the guy, he managed to cut the belt, snip 1/4 inch off, and glue it back together. It works a treat, but i will still invest in a good one. Giles sent a great link for one (that LLL recommended too) and its a bargain price, so i will go for that.

cheers guys