Page 1 of 1
Posted: Wed Jul 08, 2009 8:48 am
by Bilabonic
Hi all
After purchasing a cheap diamond disc of Ebay i want to purchase a half decent one as its basically useless !!
Anyone recommend one for a keen diyer who has a lot of standard bricks to cut.
Cheers
Posted: Wed Jul 08, 2009 2:05 pm
by msh paving
anything from the norton,marchrist,range £60-70 blade MSH 
Posted: Wed Jul 08, 2009 6:18 pm
by Bilabonic
Cheers thats what i need a brand to look out for.
Posted: Wed Jul 08, 2009 9:44 pm
by Mikey_C
I have used a spectrum tx10r, for clay paving blocks and various other things engineering bricks, house bricks and metal. and it has been absolute faultless and is still going. I paid about £40.
Posted: Wed Jul 08, 2009 11:42 pm
by slickboy
I bought a 9" Red Ten by Technidiamant off ebay for £14.50 delivered ( they are 60-70 quid normally ). It is an amazing blade has cut all sorts and is still going strong.
Posted: Sat Jul 11, 2009 12:15 pm
by Bilabonic
Mikey_C wrote:I have used a spectrum tx10r, for clay paving blocks and various other things engineering bricks, house bricks and metal. and it has been absolute faultless and is still going. I paid about £40.
Just got one off Ebay for £14.99 inc del.
Cheers