Page 1 of 1
Posted: Tue Mar 10, 2009 7:05 pm
by GB_Groundworks
saw a machine a pc130 working today with a grading bucket on it and welded onto the top of it was what looked like 300mm of scafffold bar then a receiver on top of that for a laser level a presumed so got me thinking.
anyone used them or got one not thinking full trimble control like on a dozer just make grading and draining easier.
seen this sensopilot looks a good bit of kit. might make a bracket for our leica though and give it a go first. our 2008 js160 got delivered today 
only done 1200 hrs looking forward to getting it dirty.
Posted: Tue Mar 10, 2009 7:23 pm
by msh paving
Hi GB , topcon make a good arm control sensor i had one shown to me but never bought one, i own a spectra precision ca600 mag mount i use it on the dipper off my 3 tonner, it it very usefull great magnet never falls off, bough it at SED2004 my mate borrows it alot on his js220 for dyking work and grading,
the worst thing with using one is you need to make shure the dipper is upright and bucket flat to get a constant accurate reading,
the new spectra one is self compensating for dipper angle
this is the company i use for all my survey stuff
http://www.toposell.co.uk/index.htm
very helpfull couple ex topcon staff
check out apachi laser recivers they are the dog's wotsits i have 3 off em MSH
Posted: Tue Mar 10, 2009 7:25 pm
by msh paving
Posted: Tue Mar 10, 2009 7:47 pm
by DNgroundworks
Just had a look at that site MSH might give em a ring about the topcon RL-H3CL looks like a good bit of kit.
Posted: Tue Mar 10, 2009 7:57 pm
by msh paving
You wont go for wrong with them DN iv had my stuff serviced and repaired by them for last 10 years,i am also a personal friend off theres to, if you call just say msh put you onto them MSH
Posted: Tue Mar 10, 2009 8:32 pm
by GB_Groundworks
thanks for that mark, i'll give them a ring bit far away to go have a look haha
Posted: Tue Mar 10, 2009 8:58 pm
by msh paving
you wont go for wrong giving them a call honest advice no hard sell, what you see is what you get, MSH
Posted: Tue Mar 10, 2009 9:42 pm
by msh paving
just got this from toposells main man
For info - that sensopilot mentioned is the same as our Datum 360 at
£695 + vat including cables and remote (it's a £395 extra on that site - bloody expensive all round!) As for the new trimble LR60
http://www.apache-laser.com/product/bullseye6.htm link to the apache!
This is compatible with machine full control systems so the system can be upgraded. Nice!
cheers
MSH
