The Brew Cabin

Posted: **Sat Apr 26, 2008 4:45 pm**

Good day to you all...im new to this forum although i have followed this bible of a website for a couple of years.

My leftfield question is this _ are there any makers of tooling for vacuum forming machines out there....and ...where can i get my hands on some "aluminium filled epoxy resin" for casting (to make my own mould casting tools.

Thanks

Gary ???

Posted: **Sun Apr 27, 2008 6:09 am**

No. but i know where you can get sand, cement, bricks, flags etc for footpaths and drives :;):

Posted: **Sun Apr 27, 2008 9:16 am**

seanandruby wrote:No. but i know where you can get sand, cement, bricks, flags etc for footpaths and drives :;):

Yep so do i........The Gaza strip.....its laying in the street...just help youreself

Posted: **Sun Apr 27, 2008 12:37 pm**

Google "MC Building Chemicals" in Birmingham for the epoxy, if they don`t have it they will know someone who does

Edited By flowjoe on 1209296290

Posted: **Sun Apr 27, 2008 12:52 pm**

flowjoe wrote:Google "MC Building Chemicals" in Birmingham for the epoxy, if they don`t have it they will know someone who does

thanks !!!!!!!!!

The Brew Cabin

Vacuum form tooling - Guidance