Posted: Mon May 22, 2006 11:45 am
I have just bought some Ruabon quarry tiles to lay a small path area. I also bought a standard tile cutter at the same time.
The tiles cutter bent immediately when I tried to split the tiles and I was hoping ot get some advice on a better tool to use.
The tiles are 150mm x 150mm and are 12.5mm thick.
Any help gratefully received.
The tiles cutter bent immediately when I tried to split the tiles and I was hoping ot get some advice on a better tool to use.
The tiles are 150mm x 150mm and are 12.5mm thick.
Any help gratefully received.