Posted: Thu May 20, 2021 1:48 pm
Thank you for your help with my post regarding the failed edge course on my drive. I asked someone to give me a price for the repair yesterday, and also mentioned dark stains on another part of the drive.
He said he could guarantee to remove the stains using an industrial jet wash and 'hypochlorite' - I assume Sodium hypochlorite. I looked this up and read it will remove algae etc but I don't know what the stains are, or how old they are - we noticed them about a year ago but we had had many workmen here after purchase. The drive was installed by the previous owners many years ago.
They go across both sides of the drive as well as the middle so don't look like they're caused by an oil leak. Maybe they are some kind of mastic or diesel but we can't tell.
Please see attached link for photographs.
https://1drv.ms/u/s!Ao8_zjrfOGe3gdpzkB9tQD-YrXAIzg?e=mxaeda
Unfortunately it started to rain when I took the photos but you can see the 'larger' dark patches I hope.
Should I allow the contractor to 'have a go'? (The drive has been jet washed but only with water previously).
I am not hopeful having read this site, and not knowing what the stains are but can anyone else advise a solution? (The blocks are old so replacing blocks is an option but they will not colour match).
Thank you for help.
Pete
He said he could guarantee to remove the stains using an industrial jet wash and 'hypochlorite' - I assume Sodium hypochlorite. I looked this up and read it will remove algae etc but I don't know what the stains are, or how old they are - we noticed them about a year ago but we had had many workmen here after purchase. The drive was installed by the previous owners many years ago.
They go across both sides of the drive as well as the middle so don't look like they're caused by an oil leak. Maybe they are some kind of mastic or diesel but we can't tell.
Please see attached link for photographs.
https://1drv.ms/u/s!Ao8_zjrfOGe3gdpzkB9tQD-YrXAIzg?e=mxaeda
Unfortunately it started to rain when I took the photos but you can see the 'larger' dark patches I hope.
Should I allow the contractor to 'have a go'? (The drive has been jet washed but only with water previously).
I am not hopeful having read this site, and not knowing what the stains are but can anyone else advise a solution? (The blocks are old so replacing blocks is an option but they will not colour match).
Thank you for help.
Pete