How can this detail be made to look better? - Second course narrowing

All forms of block paving, brick paving, flexible or rigid, concrete or clays, new construction or renovation
Post Reply
David 1234
Posts: 65
Joined: Tue Jul 22, 2008 11:44 am
Location: Hertfordshire

Post: # 119137Post David 1234

Hello gents. Please take a look at this photo. The second course in narrows. The driveway has been built square to the house starting from the house but the driveway is at an angle. I thought that this could be hidden over two or three courses. Landscaper says that would look worse and that’s just how it goes. What do you think? Not my driveway but landscaper wants to do mine and I have about the same angle.

Many thanks
Image
David

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 119140Post dig dug dan

That's bad practice to have line of thin cuts. He should have turned the row of blocks to the right round by 90 degrees and cut them in to avoid it! Its inevitable that the drive edge is not square to the house
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

David 1234
Posts: 65
Joined: Tue Jul 22, 2008 11:44 am
Location: Hertfordshire

Post: # 119141Post David 1234

Thanks Dan. Out of shot it narrows down to even thinner. Assuming the blocks are turned around, is there nothing that can be done to even out the sizes or is that just the nature of the beast?
David

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 119142Post dig dug dan

David 1234 wrote:Thanks Dan. Out of shot it narrows down to even thinner. Assuming the blocks are turned around, is there nothing that can be done to even out the sizes or is that just the nature of the beast?
It will look so much better cutting in as I suggest. Short of moving the threshold of the drive so its parallel with the house, there is not much can be done!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

David 1234
Posts: 65
Joined: Tue Jul 22, 2008 11:44 am
Location: Hertfordshire

Post: # 119143Post David 1234

Thank you very much indeed.
David

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 119186Post Tony McC

This image illustrates the principal....

Image

...blocks rotated to span two courses and trimmed as required but never less than ¼ of a block. No small, flimsy pieces to break and work loose, and it looks so much better!
Site Agent - Pavingexpert

David 1234
Posts: 65
Joined: Tue Jul 22, 2008 11:44 am
Location: Hertfordshire

Post: # 119283Post David 1234

Thanks Tony. Is no smaller than a quarter of a block a hard and fast rule?
David

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 119352Post Tony McC

Apologies for being late to this - had all sorts of health issues with angina during the heatwave and now an arthritic knee that is driving me mad with pain.


Yes. It's part of the British Standard.
Site Agent - Pavingexpert

Post Reply