Page 1 of 1

Posted: Mon Jun 08, 2020 11:09 pm
by zzr-matt
Evening chaps, my block paved drive was recently washed with sodium hypochlorite at a 5 to 7.5% concentration.

This has removed all the algae etc and taken out the black and yellow lichens. However quite a few areas have heavy white lichen infestations.

Is it best to hit this with hypo again or is there a better method like a biocide etc that would get them shifted even if it takes a while?

Posted: Tue Jun 09, 2020 2:17 pm
by Tony McC
Try with the super-bleach again, and then follow-up with a good quality biocide.

For some reason, even though everyone moans about the 'black spot' lichen, it's the white one that's a bugger to shift!

Posted: Tue Jun 09, 2020 5:11 pm
by zzr-matt
Thanks Tony. Any recommendations on the biocide front?

Posted: Tue Jun 09, 2020 7:02 pm
by zzr-matt
Here is before and after shot either side of the drain to show the improvement with a single hypo application... Ill see what the second hit yields, would you recommend a neat application or keep to 7.5% ish?

Image

Posted: Tue Jun 16, 2020 10:55 am
by Tony McC
Keep it dilute.

Who did those mitre cuts? Someone who had 'heard' about the technique, but never actually done it.....they're the wrong way around!!!!

Image

Posted: Tue Jun 16, 2020 11:19 am
by zzr-matt
If you are worried about the mitres then I won't show you the slips and darts...

I hit an area with another 7.5% hypo solution and left it a long time with no noticable improvement in white lichen. Im tempted to keep hitting it every few weeks as surely they will give up at some point!

Posted: Tue Jun 16, 2020 11:22 am
by Tony McC
Did you look at the Biocides page....? https://www.pavingexpert.com/maintain_04

Posted: Tue Jun 16, 2020 11:33 am
by zzr-matt
I did mention biocide above but I hadn't seen you page.... looks like there are good results.

Is there a product you would recommend?

Posted: Thu Jun 18, 2020 8:02 am
by RAPressureWashing
The cleaning solution on the stains removal page will get rid of the White lichen, (it's the one Tony calls "Roger Super Jollop" or something like that) You have to be starting with Sodium Hypochlorite at 14-15% in neat form, to dilute down the percentages show in the thread. Just follow the instructions and it will do it, you may need a second application & longer dwell time if they lichen is stubborn.

Posted: Thu Jun 18, 2020 10:54 am
by Tony McC
I can certainly vouch for Roger's Super Jollop (I even had a caller ask for it by name a couple of months ago!) but if you want to rely on a good biocide for longer term protection against re-colonisation, then the best I've found so far is Wet & Forget.

Posted: Sun Jun 21, 2020 12:10 pm
by zzr-matt
So what you guys are talking about is 7.5% hypo with a couple of squirts of johnsons baby shampoo to make it cling?

Well I hit the area with another splash of hypo yesterday and achieved these results (no chems, hypo 1, hypo 2). Not too bad.
Image

Its still clinging on in some areas so may do one more hit.

Ive then been looking at sealants and the kind people at resiblock sent me some samples to try. I dug out some spare blocks to see the effect it has and its quite dramatic. I like how they look after its dried. What is the professional verdict? (Untreated left side and treated right)
Image

Posted: Fri Jun 26, 2020 1:58 pm
by Tony McC
I used Resiblock on my CBP driveway 10 years ago. It's dulled since then, and no sealant protects against algae/lichens for more than 3-4 years, but it's so easy to maintain with just a twice-yearly application of biocide.

It's the only sealant I would consider for CBPs.