The Brew Cabin

Posted: **Sat Nov 17, 2018 4:20 pm**

Messed up really only left 5-10â€� joint depth and most grouts want 20mm minimum depth so not sure which way to proceed.
Joints are quite wide roughly 20mm, any suggestions greatfully appreciated.

Posted: **Sat Nov 17, 2018 5:29 pm**

Is this with flag paving?

If so, I;d think about grinding out at least some of the joint so that you get, say, at least a 6mm width that goes down to 20mm minimum.

Posted: **Sat Nov 17, 2018 10:49 pm**

Indian sandstone

The Brew Cabin

Shallow joint grouting options - Indian sandstone