The Brew Cabin

Posted: **Fri Aug 31, 2018 1:20 pm**

I've scoured the site, but cant seem to find what I am after. What's the best method of block paving edging when there is a fence at the side of the drive? Its a normal concrete post + concrete base panels, then wooden fence panels on top.

I've seen a few drives where they have blocked right up to and touch the base panels and I assume they just put 50mm concrete underneath, but others have kept 200mm away and I assume haunched it and then put decorate gravel on top.

advice appreciated!

Posted: **Fri Aug 31, 2018 5:08 pm**

It looks neater if its blocked right up to the gravel boards and posts
LLL

Posted: **Sat Sep 08, 2018 9:50 am**

thanks lutonlagerlout, I assume the posts and base panels are strong enough to act as the edge restraint?

Posted: **Sat Sep 08, 2018 10:06 am**

concrete posts and gravel board yes !
LLL

Posted: **Sat Sep 08, 2018 10:13 am**

great news, makes the job a bit easier

Posted: **Sat Sep 08, 2018 1:19 pm**

as long as the fence is nice and straight, or it will stick out like a sore thumb!

The Brew Cabin

Block paving against concrete fence post/panels?