Different size edging blocks.
-
Hawaii04
- Posts: 42
- Joined: Sun Mar 13, 2016 11:46 am
- Location: Kent
Hi. I've just worked out I'm going to be about 50 blocks short for my edge course. The blocks are second hand 60 mm charcoal. Looking around for these I've noticed they are all 50mm. Would this be a problem to put some 50 mm ones in. I can't see a problem myself as they will be bedded on concrete but just thought I'd ask the pros before I get my wallet out. Thanks
John
-
digerjones
- Posts: 889
- Joined: Fri Jan 18, 2008 9:32 pm
- Location: cheshire
-
Tony McC
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
....and the same manufacturer - there are subtle differences in the chamfers and corner details between the various moulds used by different manufacturers.
Even if they are the same, it's still best to mix-in the 'extra' blocks, randomise them with the current stock, so as to minimise the visual impact of any minor differences.
Even if they are the same, it's still best to mix-in the 'extra' blocks, randomise them with the current stock, so as to minimise the visual impact of any minor differences.
Site Agent - Pavingexpert