Concrete edging between drive and pavement

[harry.r]

Hi all,

Please could you advise on the best way to install a concrete edging such as the one below between the pavement and my driveway which will be block paved.

Concrete edging

I don't understand how I will be able to properly haunch the edging while installing it flush against the pavement's edge. Any advice on how you achieve this would be appreciated. Thanks.

[seanandruby]

Leave the concrete low at the front and haunch the back well. If there is a slight gap fill it with a strongish mix of sharp sand and cement, you may have to hydro fill it slightly to send the mix down the gap if not to wide.