The Brew Cabin

Posted: **Sun May 29, 2016 9:46 am**

Morning All,

Had my planning accepted (just waiting for highways) so need to get quotes for:

Extend drive 3*6 metres
Dig up and relay existing 21*2.5 metres
add block pave edging
Remove front wall
re-instate wall to side ( new edge of drive)
drop 3 kerbs.

It is n.wales mold area. Can anyone recommend a company, looked at check a trade but weary as only seems to show good reviews.

Had a few quotes before I realised I needed planning but they offered to do it without (said I didn't need it) and to drop kerbs, as they do it for council, even though I didn't have highways permission then so put me off.

Any help appreciated

Thanks

Posted: **Mon May 30, 2016 8:04 am**

The Council would normally give you a list of contractors who are approved by them to do the drop kerbs. If you don't have the highways permission to do the pavement crossover or use an approved contractor they may re-instate themselves and charge you for it.
The same approved contractors would more than likely be interested in the rest of the works also.

Posted: **Thu Jun 02, 2016 6:17 pm**

Thanks lemoncurd I will make sure I get the list from them, taking the form in tomorrow so will ask then.

The Brew Cabin

Recommendation for tarmac drive - Contractor needed