The Brew Cabin

Posted: **Fri Sep 11, 2015 10:27 am**

Hi there,
I am doing my front garden and I started once I have completed the quantity of pavers needed which totals 42sqm. Different colours from diffeernt sellers. That's not so bad, but I just realised their spacers lugs are position differently, which means, when you put two together the lugs are up against each other. How to best make use of all the bricks? I was thinking to separate the two in two areas with a border between them and lay them all in 45 herringbone pattern, but then there is the colour mixing as well. Any options would be very much appreciated. Many thanks,
Florin

Posted: **Fri Sep 11, 2015 7:19 pm**

you can nick the lugs off with a decent brick hammer (estwing)
or use a grinder to smooth them off
ballbreaker whatever way but do not lay lug against lug
LLL

Posted: **Fri Sep 11, 2015 8:38 pm**

Don't you just rotate the paver 180 degrees?

Posted: **Fri Sep 11, 2015 8:55 pm**

wont work giles
the lugs are symmetrical around the block
i have tried it and it doesnt work
LLL

Posted: **Fri Sep 11, 2015 9:06 pm**

The only way to do it without touching the lugs is to lay them upside down.
Works with certain rumbled paving not so much with 200x100s.

The Brew Cabin

Pavers with different spacer lugs - I bought pavers form various sellers