Posted: Wed Jan 29, 2014 7:05 am
I will be doing a block paved lift and re-lay and cleaning of the same drive (not one of mine by the way).
The main area not to bad so will only be reinstating the ruts.
My thought is to clean the paving first and then re-lay. The thinking being that the blocks will be easier to relay having all the crap washed off them and also the other way around I will blast any replaced jointing sand back out.
One other reason is, I want to kick this in one day, so as one is working his way down drive with washer us other two can start repairing the cleaned area.
Comments, advice appreciated.
Cheers
The main area not to bad so will only be reinstating the ruts.
My thought is to clean the paving first and then re-lay. The thinking being that the blocks will be easier to relay having all the crap washed off them and also the other way around I will blast any replaced jointing sand back out.
One other reason is, I want to kick this in one day, so as one is working his way down drive with washer us other two can start repairing the cleaned area.
Comments, advice appreciated.
Cheers