The Brew Cabin

Posted: **Sun Jun 16, 2013 10:44 pm**

We are having some Basalite Artisan Slate Premier Series Pavers installed. We chose the Herringbone Max pattern to maximize the use of the large 12X12 pavers. Here is the mix: 57% 12 X 12, 28% 6 X 12, 15% 6 X 6. We are having difficulty seeing a repeating pattern in the pattern posted on the Basalite website so as to determine when the various sizes of pavers go. The picture is not large enough to determine where the pattern repeats. Does anyone have a large picture of a Herringbone Max pattern that we could use to make sure each of the 3 sizes are being placed in the proper place. We don't want to run out of any size and have to buy more. We've got 4 pallets of 12 X 12, 2 pallets of 6 x 12 and 1 pallet of 6 X 6. Any help someone can provide would be greatly appreciated.

Thanks,

Roger

Posted: **Mon Jun 17, 2013 12:03 am**

from the web site you have this link
http://basalite.com/Landsca....0Pavers

it has a small diagram listed under sample patterns, you can just see enough of each size blocks from this diagram to get started, all you can do is a repeat of this pattern until the laying pattern is completed

doing a search at google images does not give much info either, might be a good idea to take photos of your job when its completed and upload them to a website

The Brew Cabin

Herringbone max paver pattern - Paver install question