Page 1 of 1
Posted: Wed Aug 24, 2011 1:53 pm
by Reigncloud
Hi All,
Hoping someone can help me find a match for this paving slab. I'm extending the patio and would like to match it as close as possible. The local hardware have similar types, but the edges are more right-angled and without the smooth corner. Any help appreciated!!!
http://www.dropmocks.com/mZCAW
http://imageshack.us/f/825/pavers.jpg/
Thanks,
- Jamie
Posted: Wed Aug 24, 2011 4:24 pm
by dig dug dan
looks like stonemarket yorkstone. maybe wrong
Posted: Wed Aug 24, 2011 8:39 pm
by lutonlagerlout
think stonemarket's stuff has the vertical lines on the edges of the slabs dan
maybe bradstone yorkvale in antique gold?
or possibly just a generic riven buff slab
LLL
Posted: Wed Aug 24, 2011 9:41 pm
by Pablo
I think they look like a generic locally made jobbie from a small time manufacturer
Posted: Thu Aug 25, 2011 3:04 pm
by Reigncloud
Big thanks for the help so far guys. I've emailed around a few places but no luck yet. Possible match on Brett Bronte, but they seem to also have the vertical lines on them as mentioned above.
Never thought it would be so hard to match a fairly common looking slab!
Any further assistance appreciated!
Posted: Thu Aug 25, 2011 7:33 pm
by lutonlagerlout
rain cloud mate there are loads of small slab manafacturers who all make their own buff coloured riven slabs in 450 and 600 units
as you are in london,look at the merchants close to you
buildbase,travis perkins,jewsons ,wickes even
cheers LLL
Posted: Tue Aug 30, 2011 2:36 pm
by Reigncloud
Thanks all for your help. I tracked the correct one down at a local garden centre - Chapter paving by Bowland Stone.
Cheers!!!
Posted: Tue Aug 30, 2011 4:44 pm
by lutonlagerlout
another satisfied customer of the brew cabin!!
LLL :;):
