The Brew Cabin

Posted: **Fri May 20, 2011 1:45 am**

Hi there,

I am thinking of laying a Marshalls Tegula Circle Kit and then by continuing to extend the circle with small and medium tegula blocks. I am looking at using Hazelnut for the bulk and then pennant grey for the edging, with beds either side.

After speaking to Marshalls they suggest that I continue with 2 "rows" of small followed by 2 rows of medium and then I can do whatever I pattern thereafter.

I cannot seem to find this layout anywhere and was wondering if this might be easy to lay and get peoples thoughts on this. By the way our driveway is 25m2.

Thanks,

Adam

Posted: **Fri May 20, 2011 7:32 pm**

You wont't find this layout as you would construct this laying pattern as required on site

Posted: **Fri May 20, 2011 8:35 pm**

Nice to see you again Mick you've been missed

Posted: **Fri May 20, 2011 9:55 pm**

yay mickg is back!
WB mick
LLL

Posted: **Sat May 21, 2011 2:15 am**

Mick,

Thanks for this.

I'm currently thinking of using just the small and medium blocks. My concern would be that using the large blocks would cause wider joints then necessary. Or will it be fine using a mixture of the three sizes.

Thanks,

A

Posted: **Sat May 21, 2011 6:12 pm**

If the job is only 25m2 in total I dont think you will get to a radius that will need large blocks, as you say it will lead to some big joints

The Brew Cabin

Driveway thoughts - Marshalls tegula circle