Page 1 of 1
Posted: Mon May 02, 2011 8:54 pm
by GB_Groundworks
need to match these,
Posted: Mon May 02, 2011 10:25 pm
by lutonlagerlout
some kind of brindle,but without 1 being removed no chance of full ID
they look pretty old TBH
LLL
Posted: Mon May 02, 2011 10:27 pm
by Dave_L
Whatever you put back is going to be a compromise. Best of luck G.
Posted: Mon May 02, 2011 10:29 pm
by pickwell paving
Probably marshalls? Have a look on e bay chances of getting an exact match will be slim as long as the spacers don't line up any weathered brindle should be ok.
Posted: Mon May 02, 2011 10:30 pm
by Al Jardin
Driveline 50 Brindle/Burnt ochra. Very weathered.
Al
Posted: Mon May 02, 2011 11:51 pm
by Pablo
Tbh Giles anything thats a close match would do given the state of them
Posted: Tue May 03, 2011 6:09 pm
by ken
They could be Marley’s. They always held there colour well and the aggregates were very visible years down the line as shown in the pic. From memory im sure Marley’s were 65mm thick, lift one out and have a peek.
Posted: Wed May 04, 2011 10:14 pm
by henpecked
Lol ,theres loads in the second picture, nick a few of them.
Marley brindle ,I'd say, used to sell them 20 odd years ago as seconds for me gaffer, could be some of the ones Ive flogged :laugh: