Page 1 of 1
Posted: Wed Apr 15, 2015 10:58 am
by Captain Concrete
Hi guys I got to form a 200m long channel 2m wide with a 50mm fall to the centre. I have seen roller strikers that has a bigger circumference in the middle than it has at the ends such a tool would be perfect to form the channel anyone seen or know where I can get such a roller striker?
Cheers In advanced AC
Posted: Wed Apr 15, 2015 2:19 pm
by seanandruby
Hi C'pn C. Have you tried Bunyan? I've used them for years ( not lately i must admit ) and haven''t seen one, must be new ? We used to just offset the form work . Good luck.
Posted: Wed Apr 15, 2015 2:38 pm
by Captain Concrete
Yes tried them very helpful but no joy, also tried Speedcrete and Bell
Posted: Wed Apr 15, 2015 5:28 pm
by msh paving
i would have said speedcrete, surprised they cant get you one,there manufacturing dept,is in my area i am going there tommra , ill ask bob the main man tommra MSH 
Posted: Thu Apr 16, 2015 7:12 am
by Captain Concrete
Nice one
cheers MSH
Posted: Fri Apr 17, 2015 6:12 am
by msh paving
i went to see bob dodd the production guy, he made a similar thing years ago, very expensive for a one off,for a small run it would not be cost effective sorry MSH 