The Brew Cabin

Posted: **Sat May 08, 2010 9:23 pm**

Hi everyone, great site, probably the best builders forum ive seen.Some advice would be appreciated on a job I am working on at the moment. I'm brickwork based but I do the occasional patio etc.
If I am charging Â£30 m2 (labour only)to lay a tumbled paver, what would a comparison rate be to lay a 4 size callibrated indian sandstone per m2.
Also,any ideas on a price per linear metre to lay 100mm x 100mm x 50mm sets around the edges of a lawn, there's nearly 300 metres.(West Midlands)

Posted: **Sat May 08, 2010 11:05 pm**

i charge around Â£20 per metre just for laying injun stone,but that doesnt include the digging out etc
charge as much as you can get would be my advice
LLL

Posted: **Sun May 09, 2010 9:55 am**

Not in the trade myself but this might give you an idea of the going rate for Indian Sandstone.
http://ext.pavingexpert.com/cgi-bin....l=bob_a
http://ext.pavingexpert.com/cgi-bin....hl=Â£100

Some slight variations according to where you live but as LLL has said Â£20 sq/m for labour only to lay the flags. Rising to approx Â£100 sq/m for the 'Full Monty' supply and fit job including the sub grade, sub base.

The Brew Cabin

Labour price between pavers and flags