Page 1 of 1

Posted: Mon Apr 26, 2010 5:25 pm
by absolutejim
allo all,
a friend has asked me to clean & re-seal his p-i-c, no problem there but he has got very bad tyre marks on it, it dosen't look like it has been done for quite a few years, & the marks look like they have been there a long time to, can anyone advise me on what chemical to use to remove the tyre stains before power washing,
thanks.

Posted: Tue Apr 27, 2010 10:31 pm
by plim
hi, i had to get all sorts of marks [ paint, tyre marks, tar etc ] off block paving about 2 year ago, used graffiti remover from screwfix, brush it on, leave for a while, power wash it off before it dries, worked quite well & didnt cost much, you could try it on a small patch to see how it goes. bye.

Posted: Wed Apr 28, 2010 5:58 pm
by absolutejim
plim wrote:hi, i had to get all sorts of marks [ paint, tyre marks, tar etc ] off block paving about 2 year ago, used graffiti remover from screwfix, brush it on, leave for a while, power wash it off before it dries, worked quite well & didnt cost much, you could try it on a small patch to see how it goes. bye.
thanks will look at that