The Brew Cabin

Posted: **Tue Aug 11, 2009 11:54 pm**

Thanks Tony for the reco. Worked a treat :;)

http://sting-a-ding.building.officelive.com/sitemap.aspx

Posted: **Fri Aug 14, 2009 10:27 am**

I must try to find the time to add that detail to the main site. I assume you would have no objection to me using your photos, credited to your good self, of course?

Posted: **Fri Aug 14, 2009 6:49 pm**

nice workaround there fellas
well done
LLL

Posted: **Sat Aug 15, 2009 3:41 am**

Brill to see the drawing, then the realisation so quick - right on Irish.
(thought that was a horrible prob right from the off)

Posted: **Mon Aug 17, 2009 11:08 pm**

I shall post a few more pics to show the full area. Theres a real fine example a few doors down with an attempt of using a haunch, which is really the method i wanted to avoid.

Feel free to use the pics Tony. It was the spec that convinced the client that it was the proper way to go

Irish

Posted: **Wed Aug 19, 2009 5:47 pm**

Some more pics in now and an example from of haunch from down the road.

Irish

Posted: **Wed Aug 19, 2009 6:49 pm**

Tony, LLL Could do with a little advice on what i charged for this job.
Having been a site manager for 10 yrs it come to the point where i needed a break from the position. So i decided to start on my own, as luck goes i started just as things started to calm down so the presure was yet again on me. Whilst i'm managing to tick over i dont seem to be able to make a lot of income. I'm wondering if i'm pricing up the job right so any advice would be most welcome.

Posted: **Thu Aug 20, 2009 2:15 pm**

Pricing is probably best discussed off-board, by emails or PM

Posted: **Thu Aug 20, 2009 3:52 pm**

is it ok to pm or email you Tony just to have a quick look over the quote

irish :;):

Posted: **Thu Aug 20, 2009 5:36 pm**

PM sent!

LLL

Posted: **Thu Aug 20, 2009 7:10 pm**

Right back at u LLL

:;):

The Brew Cabin

Gaffers recommendation comes to life - No edge for paviors part 2