The Brew Cabin

Posted: **Wed Jun 24, 2009 5:17 pm**

if clay pavior is chipped do you a] turn it over or b]replace it?thanks :;):

Posted: **Wed Jun 24, 2009 5:22 pm**

replace,as they only have one face MSH

Posted: **Wed Jun 24, 2009 7:38 pm**

i don't understsand.when i pointed out astained brick the paver chap simply turned the brick over.it seemed to have towo faces.ihave sinced noticed that at least 10 bricks have got chips on the surface.is this normal?should iask for them to be changed?iam i being too fussy?thanks

Posted: **Wed Jun 24, 2009 7:48 pm**

depending on the make they may possibilly be able to turn over, but if they are chipped he need to replace them as they are unfit for the job,did hhe use a rubber pad under his wacker to stop them chipping? MSH

Posted: **Wed Jun 24, 2009 8:50 pm**

the drive has not yet been finished,he is still in the process of laying the stones.,so he hasn't put amachine over the bricks.is this the next process?if he says he can just turn the bricks over ,should i accept this?he's using blockley clay paviors.thanks :;):

Posted: **Wed Jun 24, 2009 9:00 pm**

as long as they are the same on the bottom let him do it but keep a close eye as they may stand out MSH

Posted: **Wed Jun 24, 2009 10:08 pm**

thanks for all your suggestions,its very kind of you to reply.i'll .let you know how i get on tomorrow.apart from the chipped paviors we are so far very pleased thanks again:D

Posted: **Wed Jun 24, 2009 10:13 pm**

thanks for all your suggestions,its very kind of you to reply.i'll .let you know how i get on tomorrow.apart from the chipped paviors we are so far very pleased thanks:D

The Brew Cabin

Chipped paviors