I am trying to source a bradstone (charcon) internal angle kerb unit ( full desc - HB Upright internal Angle LK/D charcoal) but am not having much luck. Am in north Hertfordshire. I only need 1 to complete a project. B&Q say they stock them but am sure their info is wrong as they stock an external in Red & list the charcoal as in internal? with an incorrect image. My local ish Travis & P seem to have no stocks.
Looking forward to any assistance.
Supplier for bradstone kerb - 1 off internal angle needed
-
Dave_L
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
If no success - contact Bradstone directly and ask for help in either sourcing a unit or at least a helpful retailer.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
eazybarra man
- Posts: 111
- Joined: Thu Nov 15, 2007 4:09 pm
- Location: Scotland
- Contact:
-
ColinP
- Posts: 7
- Joined: Wed Sep 10, 2008 3:51 am
- Location: Milton Keynes
Hi
I intend on ordering some some bradstone items next week and am in Milton Keynes. Would be happy to order one for you if you wanted to collect if from me. No fee other than what the item cost
I have to say, my local B&Q were more than useless, their website has wrong photo's, no descriptions of quantity and when i treid calling them to ask questions i was left hanging on for 10 minutes or so so hung up. When visiting them i was left more confused than when i entered, none of the 'staff' seemed to know anything. I do hate knowing more than a so called 'sales assistant' after 5 minutes research online......
You may be able to answer a question i have, how many of the Bradstone external angles would be required to make a 90 degree turn? radius being quite tight, about 1m.
PM me if your interested in that kerb.
cheers
I intend on ordering some some bradstone items next week and am in Milton Keynes. Would be happy to order one for you if you wanted to collect if from me. No fee other than what the item cost
I have to say, my local B&Q were more than useless, their website has wrong photo's, no descriptions of quantity and when i treid calling them to ask questions i was left hanging on for 10 minutes or so so hung up. When visiting them i was left more confused than when i entered, none of the 'staff' seemed to know anything. I do hate knowing more than a so called 'sales assistant' after 5 minutes research online......
You may be able to answer a question i have, how many of the Bradstone external angles would be required to make a 90 degree turn? radius being quite tight, about 1m.
PM me if your interested in that kerb.
cheers
-
Handyandi
- Posts: 9
- Joined: Tue Jun 10, 2008 10:05 am
- Location: Herts
Thanks for all the help. All sorted now. After no luck other than ColinP's kind offer to order one for me or go to Rugby or Skegness (a long way for one block) it turns out I have Marshall Keykerbs, which are 2mm different in width. Located some at a Jewsons not too far away
Thanks again. Better get on with finishing the job off know.
Thanks again. Better get on with finishing the job off know.