Cellular paving on gradietn - Maximum graditent for cellular paving
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
Hi
I am thinking of using some of my front garden lawn for additional occasional car parking, using cellular paving with decorative gravel.
The area would be roughly 16ft by 16ft, on a slope.
(1) Can Cellular paving be used on slopes, if so what maximum gradient.
(2) What's the best way and easiest way of working out the gradient.
Thanks.
I am thinking of using some of my front garden lawn for additional occasional car parking, using cellular paving with decorative gravel.
The area would be roughly 16ft by 16ft, on a slope.
(1) Can Cellular paving be used on slopes, if so what maximum gradient.
(2) What's the best way and easiest way of working out the gradient.
Thanks.
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
-
- Posts: 952
- Joined: Mon Oct 30, 2006 8:24 pm
- Location: Bournemouth, Dorset
a quick look on one of the paving grid manufacturers websites (see here ) says they work on a gradient of up to 5%.
what slope do you have?
when you say working out the gradient, do you mean the best method to remove it? (i.e. dig it out) or the best method to measure the height at two points and the distance between them.
what slope do you have?
when you say working out the gradient, do you mean the best method to remove it? (i.e. dig it out) or the best method to measure the height at two points and the distance between them.
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
-
- Posts: 51
- Joined: Thu Nov 19, 2009 7:02 am
- Location: wrexham
- Contact:
basically measure the distance you plan on covering, and how much fall is over that distance.
A 1 in 20 equates to a 1 meter fall over a 20m run, which equates to a 5% gradient
if that makes sense?
A 1 in 20 equates to a 1 meter fall over a 20m run, which equates to a 5% gradient
if that makes sense?
block paving, natural stone paving, sett driveways courtyards etc, brickwork and stonework.
all aspects of natural stone paving from groundworks and drainage to completion
http://www.buildpaveandscape.co.uk
all aspects of natural stone paving from groundworks and drainage to completion
http://www.buildpaveandscape.co.uk
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
Have finally found the time to measure the site. using the longest piece of wood I could find 64cm, and have come up with the following
1st 64 cm run The fall is 9cm
2nd 64 cm run The fall is 14cm
3rd 64 cm run The fall is 17cm
4th 64cm run The fall is 12.5cm
5th 64cm run The fall is 15cm
6th 64cm run The fall is 19cm
So over the total run of 384cm the fall total is 86.5cm making an average gradient of 22% across the whole, therefore 1 in 4.5
If I have got my calculations wrong, please let me know. Also is there anything else I need to take in to consideration.?
1st 64 cm run The fall is 9cm
2nd 64 cm run The fall is 14cm
3rd 64 cm run The fall is 17cm
4th 64cm run The fall is 12.5cm
5th 64cm run The fall is 15cm
6th 64cm run The fall is 19cm
So over the total run of 384cm the fall total is 86.5cm making an average gradient of 22% across the whole, therefore 1 in 4.5
If I have got my calculations wrong, please let me know. Also is there anything else I need to take in to consideration.?
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
lutonlagerlout wrote:thats way too steep fro cellular gravel then
sorry
LLL
That's a shame:(, what are the alternatives.
Having a look herehere seems that they can be used on steeper slopes than 5% but by how much they don't say, so will contact them.
-
- Posts: 10
- Joined: Sun Aug 10, 2014 12:48 pm
- Location: Somewhere
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire