Posted: Thu Jun 14, 2007 9:58 pm
Hello to you
Can anyone tell me what I should have to pay for 30m2 area ???
Can anyone tell me what I should have to pay for 30m2 area ???
cheers LLL
The Brew Cabin
Paving, Drainage and Hard-landscaping in Britain and Ireland
https://ext.pavingexpert.com/brewcabin/
Block paving - Going rate
https://ext.pavingexpert.com/brewcabin/viewtopic.php?t=12139
Page 1 of 1
Posted: Thu Jun 14, 2007 10:47 pm
£1500 to £2400 depending on many variables,that can only be costed by a site visit
cheers LLL
cheers LLL
Posted: Thu Jun 14, 2007 10:57 pm
Thanks very much
Posted: Fri Jun 15, 2007 3:05 pm
It's dangerous to work with 'average' rates. Most residential jobs have so many variables that any suggested price can be little more than a guess. Regional variations complicate matters, but even without them, the smaller the job, the more awkward it is to give a guide price.
Posted: Fri Jun 15, 2007 4:18 pm
agreed cost of MOT round these parts is extortionate,but you have to imagine if some pikey has tried to charge someone 5k for 30 m2 then they now know its a rip off price
things like retaining walls can up the price of a job a lot,but b/paving on its own £50-80 per m2 inc kerbs is in the ballpark
LLL
things like retaining walls can up the price of a job a lot,but b/paving on its own £50-80 per m2 inc kerbs is in the ballpark
LLL
Posted: Fri Jun 15, 2007 4:49 pm
45-60 quid in NW Eng-er-land
Posted: Fri Jun 15, 2007 5:31 pm
"its grim oop north"
lol
type 1 £30 a tonne picked up here
LLL
lol
type 1 £30 a tonne picked up here
LLL
Posted: Fri Jun 15, 2007 7:57 pm
Type 1 6F2 is a helluva lot cheaper down here!
Posted: Fri Jun 15, 2007 11:16 pm
nearest quarry to use is 50 miles up the M1
such is life
can get 10 tonne for £200, but if you dont need it straightaway where to store it ???
LLL
such is life
can get 10 tonne for £200, but if you dont need it straightaway where to store it ???
LLL