The Brew Cabin

Posted: **Sun Apr 03, 2005 6:35 pm**

hello

have taken up 12m2 of large area of basket weave paving to relay after 6 years on a new plot we have had a little movement, question is how d o i get the fresh layers to whacker to the same height as the ones i have not lifted, i have set my height to 5mm, but is there a secret to getting them to sit at the same height.

Posted: **Sun Apr 03, 2005 6:52 pm**

The only way of knowing how far a paver is going to bed down into the screed is to do a test patch first. Alot of factors affect how far the paver will wacker down.

Have a read of the main web site. It is all explained there.

Cheers Carl

Posted: **Sun Apr 03, 2005 7:27 pm**

thankyou, what part of the main site is it listed on?

Posted: **Sun Apr 03, 2005 7:56 pm**

Do you want me to come and lay the blocks aswell?? LOL

Have a look at http://www.pavingexpert.com/screeding.htm

The Brew Cabin

Relaying section of paving - what height above - Relaying heigh before whacker plate