Posted: Thu Oct 07, 2004 4:14 pm
Hi me again!
Forgot to ask last time, I'm wondering what's the best way to tackle the sand bed. My current thinking is to have the 4 ton of sand delivered in jumbo bags and then spread, wack and screed managable areas of sand in sections.
I would then lay the blocks over this area before doing the same again on the next bit of sub base, rather than spread the whole 4 ton, wack it and then screed managable areas for laying.
My concern arises from the uncertainty over the weather in the next week or so, as I thought it would be better to protect the sand bed until I was ready to start laying the blocks.
Hope this makes sense
Steve
Forgot to ask last time, I'm wondering what's the best way to tackle the sand bed. My current thinking is to have the 4 ton of sand delivered in jumbo bags and then spread, wack and screed managable areas of sand in sections.
I would then lay the blocks over this area before doing the same again on the next bit of sub base, rather than spread the whole 4 ton, wack it and then screed managable areas for laying.
My concern arises from the uncertainty over the weather in the next week or so, as I thought it would be better to protect the sand bed until I was ready to start laying the blocks.
Hope this makes sense
Steve