The Brew Cabin

Posted: **Thu Aug 22, 2013 9:58 pm**

Hi,

I need to run some telecoms duct through my 4 to 5 inch concrete drive.

Any suggestions as to the best method to cut a 3 inch wide channel ?

Thanks !

Posted: **Thu Aug 22, 2013 10:12 pm**

wouldnt it be easier to dig 2 holes and mole the ducts?
I have seen water guys mole 15m in the right ground
LLL ???

Posted: **Thu Aug 22, 2013 10:20 pm**

Hi,

Thanks - possibly, but the channel needs to go around a corner (of my neighbours drive), so I would need 2 x channels at right angles to each other

Jason

Posted: **Fri Aug 23, 2013 5:06 pm**

partner k1250, saw two lines and then break out the concrete but you will notice the infill, it will stand out like a sore thumb.

Posted: **Fri Aug 23, 2013 7:38 pm**

If your keeping it tight to the house maybe one cut will do and break out.

Posted: **Sat Aug 24, 2013 9:45 pm**

Why not make a feature of it, repeat the cuts at spaced intervals down the drive, relaying with blocks or coloured concrete with ever look better.

You could even go nuts and frame the drive aswell if you got the space.

The Brew Cabin

Cut channel through concrete drive