Page 1 of 1

Posted: Wed Jul 03, 2002 1:54 pm
by Sterl
I am talking up my old tarmac drive and replacing it with blocks, I'm also widening it, Is the old tarmac any use to use as a base in the part that i'm widening. It just a thought so i dont have to get it skipped away, I'm guesing the base under the old tarmac part is going to be sound,
Cheers.
Ace site by the way

Posted: Thu Jul 04, 2002 10:18 am
by Sterl
Just read this again. I wish I could spell. I'm not talking to my old drive at all, i'm taking it up.

Posted: Thu Jul 04, 2002 2:26 pm
by 84-1093879891
You can use the EDIT facility if you spot any errors in a post of yours, but I knew what you meant. :)

Anyway, using old bitmac as a sub-base. Well, it's less than ideal, but it's better than nowt. I'd break it up as small as possible and then spread it out over the subgrade as a 'blinding', and then top it off with decent sub-base material. I'd be concerned if it was used to form the full-depth sub-base in one part of the driveway, with 'proper' sub-base material used elsewher, but, by spreading it out and combining it with 'decent' stuff, it should be ok for a residential driveway.


Posted: Thu Jul 04, 2002 3:59 pm
by Sterl
Thanks for the advice Tony. when i first posted the Q i had not looked at the site. What a great site.
Regards
Sterl