Page 1 of 1
Posted: Wed May 11, 2016 9:42 pm
by Forestboy1978
Hi,
Basically want to mount a 16mm x 150mm carbide grinding wheel to my little angle grinder for sharpening the teeth on my stump grinder without having to remove them.
I need an arbor extension for it but 22.23mm bore diameter.
Does anyone know where I might find such a thing?
Ta
Posted: Thu May 12, 2016 7:36 pm
by rxbren
Any local tool shops (as in engineering company's with lathes) they should be able to knock something up
Posted: Thu May 12, 2016 10:14 pm
by Forestboy1978
rxbren wrote:Any local tool shops (as in engineering company's with lathes) they should be able to knock something up
cheers RX. I've never used one of those places. I've been meaning to find one for a while cos there are quite a few things I'd have liked to have had made over the years.
Posted: Fri May 13, 2016 7:38 pm
by rxbren
It shouldn't be too difficult to knock up on a lathe. Have you also tried amazon?
Posted: Thu May 19, 2016 12:05 am
by GB_Groundworks
i bought a concrete polisher off ebay and it came with wrong threads for the diamond pad holder, pad holder fitted normal grinders but the polisher was american 110v and was 26 unc thread or something. dropped it into the tool shop at the factory we work at took them 25 minutes and they'd cut a new thread on it for me now works a treat
Posted: Thu May 19, 2016 12:06 am
by GB_Groundworks
quick google