Need new kit

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
sy76uk
Posts: 791
Joined: Wed Feb 05, 2014 7:50 pm
Location: leicester

Post: # 100480Post sy76uk

I got a wacker in the end. It's a bit old but it's a very heavy dyna pack with the honda engine.

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 100482Post lutonlagerlout

is it the dynapac with the water kit and the anti vibe handles

we hire them a lot and at 87kg it wacks the type 1 down hard


as a side note we had 12 tonne this week and i noticed a lot of larger chunks in the type 1 ,some were like 50mm rocks???

cheers LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

sy76uk
Posts: 791
Joined: Wed Feb 05, 2014 7:50 pm
Location: leicester

Post: # 100486Post sy76uk

I know the one you mean but this is an older one Tony. No water and it's got the steel T-bar handle. It is beast though.

lemoncurd1702
Posts: 712
Joined: Sat Oct 19, 2013 7:56 am
Location: South Wales
Contact:

Post: # 100515Post lemoncurd1702

I used to hire these years back, beast of a machine, does a superb job. Found the forward motion a bit fast though especially when going into delicate areas.

Does it have the large transport wheels that swing down?
Cheers
Lemoncurd

sy76uk
Posts: 791
Joined: Wed Feb 05, 2014 7:50 pm
Location: leicester

Post: # 100524Post sy76uk

That's the one mr Curd. I've been calling it "the beast" as it's the most powerful petrol wacker I've used.

It is a bit hard to use in tight places but not as bad as the big diesel wackers I used to have to use on 80's.
I ended up paying £300 for it which I don't think is a bad price for a decent machine even if it is a bit old.

Tony, I've been getting the same problem with the big stone on tipped loads over 10 tons. I think they palm it off on us because were getting it on a cheaper bulk rate.

Post Reply