Posted: Tue Apr 07, 2015 8:48 pm
Nice one sy
Was it big enough in the end ?
Was it big enough in the end ?
Thanks Dempsey.
Yes, I now have 2 very happy customers.
The Brew Cabin
Paving, Drainage and Hard-landscaping in Britain and Ireland
https://ext.pavingexpert.com/brewcabin/
Recent work
Page 286 of 315
Posted: Tue Apr 07, 2015 9:03 pm
Posted: Fri Apr 17, 2015 8:53 pm
Sawn and tumbled sandstone sett driveway finished
Cheers
Cheers
Posted: Fri Apr 17, 2015 8:57 pm
Few close ups
Posted: Fri Apr 17, 2015 11:59 pm
Showroom stuff Dempsey.
Posted: Sat Apr 18, 2015 7:10 am
excellent quality installation Ashley
what are those round top edgings made from?
and that stop cock,I know it has to go there but it jumps out
theres no answer to it I know but that drive looks like a showroom
fair play
LLL
what are those round top edgings made from?
and that stop cock,I know it has to go there but it jumps out
theres no answer to it I know but that drive looks like a showroom
fair play
LLL
Posted: Sat Apr 18, 2015 9:12 am
That really looks awesome Dempsey.
Do you lay the edging first on on the rolled setts one and then fill in?
Also, did you use easy point or whatever for pointing or did you do all that pointing the standard way?
I'd like to try something like that myself. Looks spectacular.
Do you lay the edging first on on the rolled setts one and then fill in?
Also, did you use easy point or whatever for pointing or did you do all that pointing the standard way?
I'd like to try something like that myself. Looks spectacular.
Posted: Sat Apr 18, 2015 10:14 am
Cheers lads
Round tops are sawn limestone Tony. Can get them in multi kerbs too.
All the borders go in first to sett levels then laid to string line. Pointing is 3/1 sharp/cem 1 slurry with sbr.
Round tops are sawn limestone Tony. Can get them in multi kerbs too.
All the borders go in first to sett levels then laid to string line. Pointing is 3/1 sharp/cem 1 slurry with sbr.
Posted: Sat Apr 18, 2015 8:48 pm
Awesome. I've been in this game a lot of years and the majority of the work I see is passable at best so it is refreshing to see someone take so much pride in there work.
every job you have posted on these pages has been stunning mate.
every job you have posted on these pages has been stunning mate.
Posted: Sat Apr 18, 2015 10:46 pm
I've got to say you've re ignited the fire in me to do something spectacular like that but I've never done an unbound driveway or block paving type affair. I really want to learn. So tempted to do my Mums like that and she just pay for materials so I can take as long as I need to get it spot on. Could it be pulled off that well first time though. I just don't have the confidence..
Dempsy was that sealed or just wet?
Dempsy was that sealed or just wet?
Posted: Sun Apr 19, 2015 9:59 am
Cheers sy seeing the work that gets posted on here makes you try that little bit harder I think. If I can become half as good as Mick G or Cookie I'll be happy
I'm 32 so I've got a few years to catch up before the knees and back go !!
Just wet forest I'll try post some dry if I go past
Cheers
I'm 32 so I've got a few years to catch up before the knees and back go !!
Just wet forest I'll try post some dry if I go past
Cheers
Posted: Sun Apr 19, 2015 11:13 am
I agree that seeing the standard of work on here in general makes you aim that bit higher
cheers LLL
cheers LLL
Posted: Sun Apr 19, 2015 11:32 am
Absolutely agree with both of you.
Posted: Sun Apr 19, 2015 9:38 pm
for some reason cant get pics to show up
Posted: Sat Apr 25, 2015 8:35 pm
I'm started using imgur. Use the bbcode and huge thumbnail. Dead easy.
Here is the job I'I'm on at the minute.
Hoping to have it finished by the end of the coming week.
Here is the job I'I'm on at the minute.
Hoping to have it finished by the end of the coming week.