The Brew Cabin

Posted: **Sun Dec 21, 2014 3:01 pm**

Nice looking job Dempsey Out of interest what are you using to clean the slurry off with?

Posted: **Sun Dec 21, 2014 4:21 pm**

That must have been a right pita. Top job though matey.

Posted: **Sun Dec 21, 2014 4:43 pm**

Cracking job Dempsey.

I used same product recently but laid it like block paving, must say it looks much better jointed as you have done.

Very classy.

Posted: **Sun Dec 21, 2014 7:57 pm**

Cheers lads. Sponge float and water to clean.

Posted: **Sun Dec 21, 2014 8:31 pm**

Great work....

Posted: **Sun Dec 21, 2014 10:18 pm**

beautiful job Ashley I love the colours

Posted: **Sun Dec 21, 2014 11:39 pm**

Cheers Mick. Haven't used anything with as much colour variation as this before, it seems to be a good quality and unique stone.

I'll keep an eye on how it weathers as its not far from me.

Posted: **Sun Dec 21, 2014 11:41 pm**

Cheers Neatcon

Posted: **Mon Dec 22, 2014 2:23 am**

work of art that dempsey
I would be happy with that on my drive
excellent mitres
incidentally I had an argument with a groundworker about kerbs heights and he reckons on all new builds the kerb/edging is set at 35mm higher than the road/drive whatever as a water bar
top job mate
LLL

Posted: **Mon Dec 22, 2014 7:03 am**

very neat

Posted: **Mon Dec 22, 2014 11:38 am**

Thanks lads.

Posted: **Mon Dec 22, 2014 5:47 pm**

lutonlagerlout wrote:work of art that dempsey
I would be happy with that on my drive
excellent mitres
incidentally I had an argument with a groundworker about kerbs heights and he reckons on all new builds the kerb/edging is set at 35mm higher than the road/drive whatever as a water bar
top job mate
LLL

Kerbs are set at a minimum of 125 on a rd. Bus stops are more strict obviously.
Depth of concrete bedding is 150 or 25-30 ml screed bed on preformed brace.
Private vehicle access is 25 ml,
agricultural vehiclr access is 25ml,
Pedestrian access is 0-6ml,
unless water run off is expected to be a problem, then a half
Battered kerb should be laid flat in situ with extra gullies placed if needed. Had same argument on new job along with depths of 450 inspection chambers, won both arguments

Hope this helps LLL.

Posted: **Mon Dec 22, 2014 10:11 pm**

cheers Sean
when I said 35mm i mean where the dropped kerb is or the edging to the driveway

25 it is !

thanks

LLL

Posted: **Mon Dec 22, 2014 10:47 pm**

Yes it is 25ml on the pins for vehicle access but obviously where pedestrian/cyclepath has water problem, the half batter laid flat gives it extra height.
Because of the angle on the kneeler to the pin you would have to grind down where the two meet.

Posted: **Sat Dec 27, 2014 9:24 pm**

Awesome job Ashley

The Brew Cabin

Recent work