Page 3 of 24
Posted: Thu Aug 09, 2012 10:50 pm
by London Stone Paving
ok
Posted: Fri Aug 10, 2012 2:41 am
by lutonlagerlout
London Stone Paving wrote:ok
1 month on "ok"?
LLL ???
Posted: Fri Aug 10, 2012 2:05 pm
by rab1
obviously Steve is a man of few words.
Posted: Fri Aug 10, 2012 6:36 pm
by Bob_A
London Stone Paving wrote:Those stones on the display are tumbled Autumn Brown driveway setts and tumbled mixed granite driveways setts.
Are they both suitable for driveways?
I'm sure the granite is but is the sandstone my prone to tyre marks and going green with moss and stuff?
Posted: Fri Aug 17, 2012 10:37 am
by London Stone Paving
Posted: Fri Aug 17, 2012 6:03 pm
by lutonlagerlout
the wall cladding i have seen in a 5 star hotel in an atrium and it looked really effective,i thought it was off cuts
patio is looking fine steve but you know what I and every other OCD fecker on here has picked up on straight away?
dont you :laugh:
did you have no gaffer tape when you did the easijoint?
cheers LLL
Posted: Sun Aug 19, 2012 12:05 am
by Thepinkpavingco
Steve I put a client onto you in the week enquiring about granite flags from wickford Essex. Is it true you have to use a white cement to lay them should I use sharp sand or soft the bed will be 40mm max and finally do I have to use an outdoor tile grout would this stain the surface ? these are all things I have heard as I have never layed this before thanks in advance danny.
Posted: Sun Aug 19, 2012 10:19 am
by dig dug dan
got to finish my raised shed base tomorrow, with some flags delivered from london stone.
Going to try that easijoint stuff, as gaps are 8mm
Will let you all know how it goes
Posted: Sun Aug 19, 2012 11:57 pm
by London Stone Paving
Thepinkpavingco wrote:Steve I put a client onto you in the week enquiring about granite flags from wickford Essex. Is it true you have to use a white cement to lay them should I use sharp sand or soft the bed will be 40mm max and finally do I have to use an outdoor tile grout would this stain the surface ? these are all things I have heard as I have never layed this before thanks in advance danny.
Cheers Danny, I wouldn't bother with the white cement. I know some people do use it and also some paving suppliers recommend it but IMO its unecessary for granite. We are considering starting to recommend white cement for sawn sandstone but, obviously sawn sandstone apart from a couple of exceptions is a lot more porous than granite
I would stick with easipoint fort the grouting. Whatever you decide to use, wipe off with a sponge as you go because the granite is flame textured and easipoint/grout can get stuck in the grain
Steve
Posted: Sun Aug 19, 2012 11:59 pm
by London Stone Paving
lutonlagerlout wrote:did you have no gaffer tape when you did the easijoint?
cheers LLL
That one was just for you Luton, got to give you something to find fault with :p
Posted: Mon Aug 20, 2012 6:43 am
by lutonlagerlout
you did ask for criticism steve
LLL
Posted: Mon Aug 20, 2012 9:21 am
by London Stone Paving
I will get it fixed up at some point. I've been concentrating inside for the past few weeks. On the verge of getting 2 more rooms done this week. got loads of pics , will put them up soon
Steve
Posted: Mon Aug 20, 2012 5:56 pm
by lutonlagerlout
its one of those really
I know steps are supposed to overhang 45mm but i find it a bollocks getting anything to stay in that much
so i always try for around 30mm
but i have still seen the bits fall out later on
cheers LLL
ps its shocking what finishing costs inside the house eh steve?
Posted: Mon Aug 20, 2012 9:52 pm
by Pablo
Steve if you extend your house you'll have no garden left and worse still no where to BBQ. A man without a BBQ isn't really a man anymore.