Mini crusher
-
- Posts: 393
- Joined: Fri Jun 13, 2008 6:20 pm
- Location: bolton lancs
- Contact:
-
- Posts: 393
- Joined: Fri Jun 13, 2008 6:20 pm
- Location: bolton lancs
- Contact:
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Ambient - please turn off your CAPS LOCK key!!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 393
- Joined: Fri Jun 13, 2008 6:20 pm
- Location: bolton lancs
- Contact:
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
Hi
sorry for the delay. been working away for a few days
i was told at sed, £38,000
regards
sorry for the delay. been working away for a few days
i was told at sed, £38,000
regards
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 393
- Joined: Fri Jun 13, 2008 6:20 pm
- Location: bolton lancs
- Contact:
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
not to mention a suitable towing vehicle, trailer and tachograph!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 481
- Joined: Wed Aug 17, 2005 11:55 pm
- Location: glasgow
i doubt that these mini crushers can justify the purchase costs comparing to ripping up landfilling and replacing with virgin mot type one.the saving if anything is too small.
i'm sure the only way is to make some reclamation requirements for a certain contract.
we used the tcp recently for replacing slabbed footpaths. we saved on the type one cost,but its a lot slower than the old method.i wont be buying one and probably wont use again.
i'm sure the only way is to make some reclamation requirements for a certain contract.
we used the tcp recently for replacing slabbed footpaths. we saved on the type one cost,but its a lot slower than the old method.i wont be buying one and probably wont use again.
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 481
- Joined: Wed Aug 17, 2005 11:55 pm
- Location: glasgow
lutonlagerlout wrote:i find that in certain circumstance they are very handy bobbi,in others no point as you say
LLL
agreed,its a great piece of kit,i just dont think you can get a decent return for an investment of near 30k.
it may change in the future,but at the moment the saving in avoiding landfill and buying sub-base costs are offset by the hire/purchase outlay and the increase in time it takes to lift,crush and place compared to the usual method.
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
whilst i agree the initial outlay is not justified (£16,500+vat which is why i hire mine out to get the money back), the cost of hiring to the end user is.
Only last week, i hired it to a builder who had demolished an old extension and a concrete drive, and wanted to crush it to use as over site on his new extension.
He had a quote for a grab lorry of £320 to take away the rubble, and another of £200 for bringing the crushed back in.
I hired him my machine, £160 for the day, and he was quids in.
What you have to take into account is the time saving, and quality end product.
How many of us have had a load of crushed delivered to find it is full of cement bags, wood, nails and sawdust?
As an example, if you were working round the back of a property and had broken up an old patio, walls and paths what would you normaly do?
Spend all day barrowing round to a skip, then barrowing all the crushed back in. So you've got the trouble of barrowing into a skip (or using a skip loader), the delivery of crushed to wait for and the barrowing it all back again. And assuming you could get it all in one skip of course
With a crusher, you take the machine to where the concrete is and crush it there and then.
There are now strict regulations that state any building works over £200,000 MUST have a SWMP in place (site waste management plan), and all concrete and rubble must be dealt with on site.
Whilst i am unsure as to if it works or not, one of my customers crushes to 20mm , mixes it with sand and cement and pours it back in as footings for the new build. (it has been passed by a bs by the way)
There is a future for crushing on site, and all the time landfill goes up, and the quality of crushed deterioates, then the crusher becomes more attractive to all
thats dissapointing you did not get on well. Who did you hire from and how much was it?
Sounds like you weren't set up properly
Only last week, i hired it to a builder who had demolished an old extension and a concrete drive, and wanted to crush it to use as over site on his new extension.
He had a quote for a grab lorry of £320 to take away the rubble, and another of £200 for bringing the crushed back in.
I hired him my machine, £160 for the day, and he was quids in.
What you have to take into account is the time saving, and quality end product.
How many of us have had a load of crushed delivered to find it is full of cement bags, wood, nails and sawdust?
As an example, if you were working round the back of a property and had broken up an old patio, walls and paths what would you normaly do?
Spend all day barrowing round to a skip, then barrowing all the crushed back in. So you've got the trouble of barrowing into a skip (or using a skip loader), the delivery of crushed to wait for and the barrowing it all back again. And assuming you could get it all in one skip of course
With a crusher, you take the machine to where the concrete is and crush it there and then.
There are now strict regulations that state any building works over £200,000 MUST have a SWMP in place (site waste management plan), and all concrete and rubble must be dealt with on site.
Whilst i am unsure as to if it works or not, one of my customers crushes to 20mm , mixes it with sand and cement and pours it back in as footings for the new build. (it has been passed by a bs by the way)
There is a future for crushing on site, and all the time landfill goes up, and the quality of crushed deterioates, then the crusher becomes more attractive to all
we used the tcp recently for replacing slabbed footpaths. we saved on the type one cost,but its a lot slower than the old method.i wont be buying one and probably wont use again.
thats dissapointing you did not get on well. Who did you hire from and how much was it?
Sounds like you weren't set up properly
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 393
- Joined: Fri Jun 13, 2008 6:20 pm
- Location: bolton lancs
- Contact:
i find it worth hiring we crush all flags,old blockpaving,walls and concrete (also all offcuts) that we take up from driveways and patios so we save on landfill and save on mot.only problem is only two hire companies in lancashire have 3.5 ton crushers and both are good few miles away ie £50 delivery and both are red rhinos
ambientdriveways.co.uk ambientexcavations-bolton.co.uk
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
two hire companies in lancashire have 3.5 ton crushers and both are good few miles away ie £50 delivery and both are red rhinos
oh dear. shame no one has a guidetti or the new bavtrak 025
Edited By dig dug dan on 1218290782
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 393
- Joined: Fri Jun 13, 2008 6:20 pm
- Location: bolton lancs
- Contact:
-
- Posts: 77
- Joined: Sat Jul 05, 2008 6:47 pm
- Location: Dorset, UK
- Contact: