Page 200 of 315

Posted: Thu Jun 13, 2013 7:46 pm
by lutonlagerlout
those rope topped edgings looked nice earlier
now they look too small to me
if that was my gaff (which it isnt)
I would have a feature specimen tree in the middle
cheers LLL

Posted: Thu Jun 13, 2013 8:12 pm
by lutonlagerlout
like opposite twins these two flags
Image

before

Image

after

Image

raised area detail
Image

used weatherpoint365 for the first time here
LLL

Posted: Thu Jun 13, 2013 9:09 pm
by dig dug dan
How was the pulvex blade?

Posted: Thu Jun 13, 2013 9:14 pm
by specialbranch
Got this job done a couple of days early so had a nice bit of time sorting my Teg drive at home today, My Ranger has been dropping a spot of oil so had 2m2 to uplift and relay then pressure wash and resand.
Image

Posted: Thu Jun 13, 2013 9:22 pm
by dig dug dan
Nice to see that laying pattern. Much easier than the full random pattern. What did you point with?

Posted: Thu Jun 13, 2013 9:33 pm
by specialbranch
I always point with 3:1. were lucky round here the Building sand either yellow or soft grey/missen goes through the guns without any blockages, no fancy addatives needed.

Posted: Thu Jun 13, 2013 9:44 pm
by lutonlagerlout
pulvex blade worked fine Dan
its cut the last 4 jobs no probs
those autumn brown are fairly hard flags though
went through the argent easy

nice work special branch
did you do those piers as well?
piers look fab
the chipie who cut the fence needs specs :;):
LLL :)

Posted: Thu Jun 13, 2013 10:02 pm
by specialbranch
The guy im working for is a Chippie! to be fair to him the laths were cut to the old pillars he built! The old pillars were well supported in the cavity, 6 empty carling black lable cans in each!. His wife has just booked me in to do a 15m2 deck. dont know if he knows yet. The pillars were a steady job. the railings were existing and both slightly different, every stone had to be dressesd to fit.

Posted: Thu Jun 13, 2013 10:54 pm
by London Stone Paving
Nice work boyos. Pattern does look good sb.
What's with that raised plinth in the corner tony?
How long did it take to point with the 365, are you a converted man?

Posted: Thu Jun 13, 2013 11:15 pm
by mickg
>>>I would have a feature specimen tree in the middle
a architectural specimen Christmas tree would look nice :D

>>>are you a converted man?
weatherpoint 365 - its the future :)

Posted: Fri Jun 14, 2013 5:44 am
by cookiewales
mickg wrote:>>>I would have a feature specimen tree in the middle
a architectural specimen Christmas tree would look nice :D

>>>are you a converted man?
weatherpoint 365 - its the future :)

tree it will be as a present from me .the client has hundreds of them. time lapse http://www.youtube.com/watch?v=mZiu64Ir2Js




Edited By cookiewales on 1371185187

Posted: Fri Jun 14, 2013 6:34 am
by seanandruby
cookie, not criticising ( wouldn't dare the maester ) but all i can see is a charlie chaplin type runaround. Think your in danger of over egging the mix with time lapings. I much prefer some stunning shots by the camera. Just my opinion as lapses can become boring. Did you sort your mits out with the dr?

Posted: Fri Jun 14, 2013 6:56 am
by mickg
I was going to pass the same comment as sean a couple of days ago (we have so much in common sean :p )

the skill required to do the type of work you do cookie is priceless and while the time lapse is different just having a small area being laid as a video every few days would make a fantastic 1 - 2 minute video when joined together or do photos every day and use these joined together with the different effects now available into a professionally made video

I am currently having 3 videos made professionally using photos with the ken burns effect where the photo looks like its moving with a actors voice over

Posted: Fri Jun 14, 2013 7:17 am
by lutonlagerlout
i like the time lapse its just too fast for me
but i like the warts and all approach
interested to see your new video mick
LLL

Posted: Fri Jun 14, 2013 11:07 am
by rimexboy
I think the time lapse is good, cracking work:D