Posted: Sat Jun 01, 2013 7:24 am
the black gold relaxes my muscles
each to their own eh?
LLL
each to their own eh?
LLL
base was 120mm thick
done for now
then I started on the other pond 
The Brew Cabin
Paving, Drainage and Hard-landscaping in Britain and Ireland
https://ext.pavingexpert.com/brewcabin/
Recent work
Page 197 of 315
Posted: Sat Jun 01, 2013 7:49 am
got on with fixing my pond last weekend
base was 120mm thick
done for now then I started on the other pond
base was 120mm thick
done for now
then I started on the other pond Posted: Sat Jun 01, 2013 9:08 pm
I'm liking our 350mm pulvex blade the only thing is makes a hideous high pitch whistling on the floor saw enough on a long cut job to give you a cracking headache
Posted: Sat Jun 01, 2013 9:27 pm
Looks like you have your work cut out there michael!
Posted: Sun Jun 02, 2013 6:57 am
hardcore you know the score michael :;):
keep up the good work
LLL
keep up the good work
LLL
Posted: Sun Jun 02, 2013 12:49 pm
Take it all out and have a swimming pool I say
Posted: Sun Jun 02, 2013 5:45 pm
anybody got any veras, lovelylutonlagerlout wrote:hardcore you know the score michael :;):
Posted: Tue Jun 04, 2013 10:06 pm
fun job today before i go away in the morning
remove 20-40mm off a concrete slab over about 20m2 in total
remove 20-40mm off a concrete slab over about 20m2 in total
Posted: Tue Jun 04, 2013 10:21 pm
That hanging hydraulic hose!! Planing concrete, hard going! Watch out for rebar that has floated up to the surface or the surface has worn away - one sure way to loose your pecks 
Posted: Tue Jun 04, 2013 10:46 pm
Strange, that looks like that slab you cast about 6 weeks ago giles?
somebody have an after thought?
have a good trip
LLL
somebody have an after thought?
have a good trip
LLL
Posted: Tue Jun 04, 2013 11:21 pm
Looks a bit dusty in there giles, hope you had the mask on mate:)
Posted: Tue Jun 04, 2013 11:56 pm
No in the wet mix area about quarter of a mile from new slab
Those small hose just do the side to side shift tighten on lowering
It was more screed than concrete planer minced through it
Robot was steer on joysticks bucket lift on one pedal bucket crown on the other pedal, wasn't a fan of the pedals prefer it all on the joysticks
We couldn't use water as the resin floor lads wanted to prime today, had full head respirator like all guys in there due to all the powders
We are on a 4 day ISO10800 compliance so hse are in whole site, full cdm rules and everyone of high alert.
Edited By GB_Groundworks on 1370386747
Those small hose just do the side to side shift tighten on lowering
It was more screed than concrete planer minced through it
Robot was steer on joysticks bucket lift on one pedal bucket crown on the other pedal, wasn't a fan of the pedals prefer it all on the joysticks
We couldn't use water as the resin floor lads wanted to prime today, had full head respirator like all guys in there due to all the powders
We are on a 4 day ISO10800 compliance so hse are in whole site, full cdm rules and everyone of high alert.
Edited By GB_Groundworks on 1370386747
Posted: Wed Jun 05, 2013 6:04 am
tuesdays work lovely weather 25m2 http://www.youtube.com/watch?v=eTcrj_OHzP0 
Edited By cookiewales on 1370409127
Edited By cookiewales on 1370409127
Posted: Wed Jun 05, 2013 6:36 am
Are you coming out of that corner Bruce??? 
Posted: Thu Jun 06, 2013 6:22 am
cracking day laying the setts getting to the corner hag its 40 liner meters now 5m2 a course http://www.youtube.com/watch?v=bfmvhh4THsw&feature=youtu.be
http://www.youtube.com/watch?v=bfmvhh4THsw&feature=youtu.be