Page 196 of 315

Posted: Wed May 29, 2013 9:35 pm
by dig dug dan
why is there what appears to be a piece of wood jammed into the circle in the foreground?

Posted: Wed May 29, 2013 9:45 pm
by dig dug dan
front driveway started.

Image

After:
Image

Image

Soakaway in and drainage channel (note, no one else has bothered!)

Image

Posted: Wed May 29, 2013 10:07 pm
by lutonlagerlout
at least you are making the effort dan
I still cant figure out how a gradient level spinning outside a circle can do the levels around the circumference
surely it would have to be dead centre of the circle for that to work
looking good both of you
LLL :)

Posted: Thu May 30, 2013 6:06 am
by cookiewales
dig dug dan wrote:why is there what appears to be a piece of wood jammed into the circle in the foreground?
thats a checker set with a line to outside bands there are four in al n s e w it all helps the outside of circle is now 25 liner meter long :D

Posted: Thu May 30, 2013 6:51 am
by msh paving
LLL . the laser is set away from the circle, but on a leval grade,cookie has set a straight edge as a datum for the grade, on every course he sets the detector on the grade datum, then checks ever 6 sets say around the circle to keep the fall, then using a lump of oak levals them up between each other,
it took a bit of working out but we got there in the end,
could you expliain it any better cookie MSH :D

Posted: Thu May 30, 2013 8:03 pm
by cookiewales
well boyos todays work done 24 m2 aprox 2000 setts laid aprox 6000 taps with 1.5 lb lump hammer no wonder my ham strings are screaming help pic to follow and time lapse :D ps 3 bottles of henry westons vintage 8.2 then some ipa gold helps :p :p :p http://www.youtube.com/watch?v=nDB8kiwEL_E&feature=youtu.be



Edited By cookiewales on 1369943235

Posted: Thu May 30, 2013 8:23 pm
by rimexboy
sounds nice cookie you have worked hard for it that's for sure :D

Posted: Fri May 31, 2013 6:37 pm
by lutonlagerlout
small path area 2.5 dayer

Image

Image

Image

couple of hours pointing tomorrow

LLL

Posted: Fri May 31, 2013 7:12 pm
by dig dug dan
Did you have to disc a line to meet the old concrete. ? Looks ten times better.

Posted: Fri May 31, 2013 7:22 pm
by GB_Groundworks
Cookie a wider view would be better, over a longer period so you can see the transformation maybe over the entire job, 1 photo a minute gives you 1second of video is 24minutes


http://youtu.be/NAiV09Cl1UM

Posted: Fri May 31, 2013 7:30 pm
by rimexboy
Very nice transformation tony just your camera work needs attention:p

Posted: Fri May 31, 2013 10:49 pm
by lutonlagerlout
I aint no cameraman simon :;):
job was a bit of a ball breaker as front and rear paths were level so had to introduce a 20mm crossfall away from the front door
yes the pulvex blade made short work of the old concrete dan
took 10 mins each front and rear to go through 100MM of concrete
cheers LLL :)

Posted: Sat Jun 01, 2013 6:29 am
by cookiewales
GB_Groundworks wrote:Cookie a wider view would be better, over a longer period so you can see the transformation maybe over the entire job, 1 photo a minute gives you 1second of video is 24minutes


http://youtu.be/NAiV09Cl1UM
need to chat to the brino man on lens :D

Posted: Sat Jun 01, 2013 6:32 am
by cookiewales
john wrote:Cookie

How do you straighten up after each day your back must ache mate.

John
oh yes the hamstrings hurt more back is good good old henry westons is the fix :p