Never unavoidable just got to pick some slabs up and scratch your head a bit lovely work thoughdig dug dan wrote:the quality of the workmanship was so good, i never noticed the two 300's. sometimes its unavoidable!
Recent work
-
- Posts: 196
- Joined: Fri Jun 17, 2011 10:49 pm
- Location: Romford Essex
-
- Posts: 196
- Joined: Fri Jun 17, 2011 10:49 pm
- Location: Romford Essex
-
- Posts: 1568
- Joined: Mon May 10, 2010 9:58 pm
- Location: Gatwick
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 1854
- Joined: Tue Aug 19, 2008 7:03 pm
- Location: kings lynn norfolk
- Contact:
The existing paving was at 1 brick below damp,same all around house,he's a retired civil engineer so knows the trade, in this area the are alot of houses at 1 below damp,to reduce it would be more work than enough ,free draining ground so no standing water, but at the end off the day he requested to replace line and leval so that's what we did MSH
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk
http://mshpaving.co.uk
-
- Posts: 1568
- Joined: Mon May 10, 2010 9:58 pm
- Location: Gatwick
- Contact:
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
We can get c35 at £68/m if we order over 50m in one pour
Last year we did about 340m3 of concrete through Cemex or our local mini mix, I was going through invoices and noted out of interest
Local mini mix is gerenerally 120 a metre on say 3m delivery c35
Last year we did about 340m3 of concrete through Cemex or our local mini mix, I was going through invoices and noted out of interest
Local mini mix is gerenerally 120 a metre on say 3m delivery c35
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Posts: 1568
- Joined: Mon May 10, 2010 9:58 pm
- Location: Gatwick
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
new job this week
increase door opening from 2.4 to 4,2 m
what a ball breaker
monday
they sent us the new version of the genie lift
sadly we couldnt lift the 230kg steel 45 inches off the floor
might work on smaller stuff
today
doors getting fitted at midday tomorrow better get my finger out
some lump of steel 240 by 160 with a 240 by 6mm plate welded to the underside to take the outside work
LLL
increase door opening from 2.4 to 4,2 m
what a ball breaker
monday
they sent us the new version of the genie lift
sadly we couldnt lift the 230kg steel 45 inches off the floor
might work on smaller stuff
today
doors getting fitted at midday tomorrow better get my finger out
some lump of steel 240 by 160 with a 240 by 6mm plate welded to the underside to take the outside work
LLL
-
- Posts: 1568
- Joined: Mon May 10, 2010 9:58 pm
- Location: Gatwick
- Contact:
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Not strictly work but our 16 tonner and mini-me parked side by side
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire