Page 12 of 24

Posted: Sun Jun 09, 2013 7:54 pm
by lutonlagerlout
its like they get all the biggest idiots and imbeciles in the world and make them multidrop drivers

in fairness i guess its a stressful job,but they dont half make it hard for themselves

LLL

Posted: Sun Jun 09, 2013 9:17 pm
by London Stone Paving
mickg wrote:every delivery now has to have the name of company on the vehicle who I placed the order with or it will not be being delivered at all
Don't blame you mick. There is also the issue of damages as well, much higher percentage because as you say, the people who are delivering could not give a damn about what they are delivering. We usually end up sending replacements at our cost but it still causes problems for the contractor

Posted: Tue Jun 11, 2013 11:20 am
by London Stone Paving
I went to Barnes on Friday to photograph a project using our Yorkstone. The contractor (Landscaping Solutions LTD) is planning to put the project for a BALI principal award.

Image

Image

Image

Image

Image

The stone is Buff Yorkstone cut straight from the block. I really like the project because to me it demonstrates that "the outdoor rooom" style of garden does not always have to be a super contemporary scheme. This one had a real traditional feel to it. This was a nother job done by the same contractor a couple of years ago but in the more contemporary style (this one won a BALI prinicipal wars)

Image

Posted: Thu Jun 13, 2013 12:56 pm
by London Stone Paving
Image

Posted: Thu Jun 13, 2013 1:26 pm
by Bec@LondonStone
Image

Posted: Thu Jun 13, 2013 1:27 pm
by Bec@LondonStone
Image

Posted: Thu Jun 13, 2013 1:27 pm
by Bec@LondonStone
Image

Posted: Thu Jun 13, 2013 1:28 pm
by Bec@LondonStone
Image

Posted: Thu Jun 13, 2013 1:48 pm
by Bec@LondonStone
Hi guys, hope everyone is well. We had a massive block of York stone delivered the other day, biggest one yet. Thought I'd upload a few piccies for you to see. An average block measures approx. 2.3m x 1.3m x 1.3m. This block measured 3.3m x 1.5m x 1.2m before we began cutting.

LLL - I'm sorry I missed you the other day, was hoping to say hello when you popped in but I was with a customer in the showroom. It's good that you finally managed to meet Ste though - did you manage to get a cup of tea out of him??

Posted: Thu Jun 13, 2013 5:21 pm
by dig dug dan
what would that forklift actually lift? can you use it to pull out tree stumps?? :D

Posted: Thu Jun 13, 2013 7:39 pm
by lutonlagerlout
Hi bec ,
i saw you were busy so left you alone :;):

tea! not a barn dance

the clients went to the coffee shop and got themselves coffees drinks and ice creams

me, i was as dry as ghandis flip flop

very impressed with the set up,I may be wrong but i asked steve about that monster fork truck,think it can lift 16 tonnes

proper bit of kit

LLL :)

Posted: Thu Jun 13, 2013 10:59 pm
by London Stone Paving
I think hair of the dog would have been more appropriate tone
:laugh:
That thing will lift 15 ton if its in the mood

Posted: Thu Jun 13, 2013 11:18 pm
by lutonlagerlout
it wasnt a hangover steve
just insomnia
honest
LLL :;):

Posted: Fri Jun 14, 2013 9:29 am
by Bec@LondonStone
That cafe is not great for coffee, whatever you order you get exactly the same thing - just sometimes it comes with chocolate powder on top.

The forklift is huge, it's really difficult to show quite how big it is on a photo. Somehow it never looks as impressive as it does 'in the flesh'.

Posted: Mon Jun 17, 2013 9:58 am
by London Stone Paving
Question for all the Paving Experts

Has anyone ever done a cost comparison for traditional pointing v gun mortar pointing v 1 part resin sweep in's.

Its a question I was asked recently and left me a bit stumped