The Brew Cabin

Posted: **Thu Jan 12, 2012 6:20 pm**

lutonlagerlout wrote:btw getting set to have the elite gold tiles installed,which way up should they go?
riven or flat?
and what to seal with?

Elite gold tiles, riven face on the surface. you can seal with lithofin stain stop.

Posted: **Thu Jan 12, 2012 6:28 pm**

Could you not use steel purlings at 1500 cl as per 99% of industrial sheds. These can be upto 8m long.

Posted: **Thu Jan 12, 2012 9:03 pm**

London Stone Paving wrote:
lutonlagerlout wrote:btw getting set to have the elite gold tiles installed,which way up should they go?
riven or flat?
and what to seal with?

Elite gold tiles, riven face on the surface. you can seal with lithofin stain stop.

cheers steve
going in the mother outlaws kitchen
any special does and donts?
LLL

Posted: **Thu Jan 12, 2012 9:06 pm**

rab1 wrote:Could you not use steel purlings at 1500 cl as per 99% of industrial sheds. These can be upto 8m long.

will have a look into that one Rab.

Tony, you cat really go wrong with that stuff. Doesn't mark easily but is still easy to cut

The Brew Cabin

Putting in an rsj