Page 2 of 2
Posted: Thu Aug 01, 2013 5:35 pm
by lutonlagerlout
I know its stable doors and horses,but to run a car over flags/slabs I have laid the slabs/flags directly onto 100mm of concrete rather than bedded them onto concrete
it sounds like your bedding material has failed
can you just repoint?
LLL
Posted: Thu Aug 01, 2013 6:11 pm
by rimexboy
Thanks tony yes I can repoint if that's what's best,
What pointing would you suggest for this please
Posted: Thu Aug 01, 2013 6:54 pm
by lutonlagerlout
easipoint or similar
LLL
Posted: Thu Aug 01, 2013 8:36 pm
by rimexboy
Thanks tony, sorry to be a total pain any idea what one I need to use, would it be the easipoint standard? And would I apply it using a gun?
Also who would stock it please..
Thanks again
Posted: Thu Aug 01, 2013 10:07 pm
by lutonlagerlout
you could use easipoint or larssen
just google them simon
you will need a pointing gun,paddle drill,and a couple of gorilla buckets
for anyone used to working with mortar its straightforward
but need to make sure all flags are secure first really
LLL
Posted: Fri Aug 02, 2013 7:59 am
by rimexboy
Thanks tony Steve sells that, thanks that's great I will see if I can get it closer....
Do I need to ad anything to the water before mixing or just mix with fresh water...
Posted: Fri Aug 02, 2013 8:30 pm
by lutonlagerlout
you need 3 buckets
1 clean water with measuring jug for the mix
1 clean water for cleaning the gun+scoop
1 more clean for extra cleaning
LLL